vivavoseAvatar de vivavose118 billets | Profil Recherche Google

ce blog tous
Derniers billets Connexion



LED chip


There are two primary ways of producing high intensity white-light using LEDs. One is to use individual LEDs that emit three primary colors[59]—red, green, and blue—and then mix all the colors to form white light. The other is to use a phosphor material to convert monochromatic light from a blue or UV LED to broad-spectrum white light, much in the same way a fluorescent light bulb works.
  Due to metamerism, it is possible to have quite different spectra that appear white.
  RGB systems

Combined spectral curves for blue, yellow-green, and high brightness red solid-state semiconductor LEDs. FWHM spectral bandwidth is approximately 24–27 nm for all three colors.
  White light can be formed by mixing differently colored lights, the most common method is to use red, green and blue (RGB).

Hence the method is called multi-colored white LED's (sometimes referred to as Red Green Blue LED's). Because these need electronic circuits to control the blending and diffusion of different colors, these are seldom used to produce white lighting. Nevertheless, this method is particularly interesting in many uses because of the flexibility of mixing different colors, and, in principle, this mechanism also has higher quantum efficiency in producing white light.

There are several types of multi-colored white LEDs: di-, tri-, and tetrachromatic white LEDs. Several key factors that play among these different methods, include color stability, color rendering capability, and luminous efficacy. Often higher efficiency will mean lower color rendering, presenting a trade off between the luminous efficiency and color rendering. For example,LED strip light  the dichromatic white LEDs have the best luminous efficacy (120 lm/W), but the lowest color rendering capability.

Conversely, although tetrachromatic white LEDs have excellent color rendering capability, they often have poor luminous efficiency. Trichromatic white LEDs are in between, having both good luminous efficacy (>70 lm/W) and fair color rendering capability.

Multi-color LEDs offer not merely another means to form white light, but a new means to form light of different colors. Most perceivable colors can be formed by mixing different amounts of three primary colors. This allows precise dynamic color control. As more effort is devoted to investigating this method, multi-color LEDs should have profound influence on the fundamental method which we use to produce and control light color.

However, before this type of LED can play a role on the market, several technical problems need solving. These include that this type of LED's emission power decays exponentially with rising temperature,[61] resulting in a substantial change in color stability.LED failure  Such problems inhibit and may preclude industrial use. Thus, many new package designs aimed at solving this problem have been proposed and their results are now being reproduced by researchers and scientists.

LED Lamp LED chip manufacturers in Taiwan Core 1 Epistar (Epistar) referred to as: ES, (United Quan, Yuan Kun, Lian Yong, National League), Canton Ga optical (Huga), New Century (Genesis Photonics), Jehovah (Arima Optoelectronics) referred to: AOC, Thai Valley Optoelectronics (Tekcore), Kellett, huge new light macro, crystal hair, as the record, Chau Lei, Lian-Sheng (HPO),LED flood lightHan Kuang (HL), Guanglei (ED), Ding Yuan (Tyntek) referred to: TK, Yao Fu Chau Technology TC, Chan Yuen (Formosa Epitaxy), National General, United tripod, new photovoltaic (VPEC) and so on.

Huaxing (Ledtech Electronics), East Bay (Unity Opto Technology), light tripod (Para Light Electronics), million light (Everlight Electronics), Bai Hong (Bright LED Electronics), this table (Kingbright), Mitsubishi Precision Health (Lingsen Precision Industries), Robert (Ligitek Electronics), Lite (Lite-On Technology), Hong Qi (HARVATEK) and so on.

2 China LED chip makers Liu Runze Optoelectronics, An optical three short (S), Shanghai Blue (Epilight) referred to (E), Shilan Ming core (SL), the United States referred to in Dalian Road (LM), Di source Optoelectronics, China Can optoelectronics, Nanchang, Yan Lei, Shanghai Jinqiao Chen, Hebei Lide, Hebei Department of energy, Shenzhen Orient, Shenzhen Century Epitech, Guangzhou Puguang, Yangzhou Huaxia integration, Suntime Gansu Power Company, Dongguan blessed electronic materials, clean core optoelectronics, optical crystal, in the dim light electronics, dry according to optoelectronics, Litemax, the Shenzhen side a large, Shandong Huaguang, Shanghai Sapphire and so on.

3 LED chip manufacturers abroad CREE, Hewlett-Packard (HP), Nichia (Nichia), sulfur Cummings, Toyoda Gosei, the ocean on acid, Toshiba,Tin Box  Showa Denko KK (SDK), Lumileds, Xuming (Smileds), Genelite, Osram (Osram), GeLcore, Seoul Semiconductor, Puri, Han Guoan firefly (Epivalley) and so on. Edit this paragraph fifteen: LED lamp housing (LED lamp cup) LED lights are efficient, environmentally friendly, long life. But the common people will find LED lights, LED brightness particularly because it is easy to make solar energy into heat energy, making the LED lamp is hot.

At this time, so if the LED is not cooling as quickly as possible, its life will be greatly reduced. Many LED manufacturers use aluminum to the LED lamps. Easy to heat aluminum shell, attractive appearance, light weight, many high-end electronic products with aluminum casing.